40mm ABS 92.5° Solvent Weld Waste White Swept Bend
Swept bends are used to create a 92.5-degree change of direction in a waste pipe system. They have a longer radius than knuckle bends and the 92.5-degree angle promote a self-cleansing flow.
Our solvent weld waste is manufactured in the UK to BS EN 1455 and is kitemarked.
To make a solvent weld joint, first ensure that the outer wall of the pipe and the inner wall of the fitting are both clean and free from grit or swarf. Apply SC250 solvent cement to both surfaces. Push the pipe fully into the fitting and give it a twist to ensure that full contact has been made. Clean off any excess solvent with a damp cloth and leave for 5 minutes to set. The installation should be left for 12 hours before testing.
Solvent weld joints are permanent - they cannot be demounted once the joint has been made. When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames. Avoid any contact with skin - if contact does occur then wash thoroughly with soap and water.
Weight: 0.047 Kg
Delivery: Lead time - in stock
Brand Name: Floplast
Colour: White
Size: 40mm
Guarantee: 10 Years Manufacturers
Delivery
The despatch timings we publish are estimates and due consideration needs to be made when making purchases with tight deadlines and as such we shall not be liable for any losses, costs, damages, charges, or expenses caused by any delay for delivery of the goods.
Returns Policy For Brissco Online
We appreciate that there may be occasions you may wish to return items. To help you with this process please see our returns policy below.
Returning an item – Damaged
In the event you receive damaged goods we will arrange a replacement item for you. However, it is your responsibility to notify us within 72 hours of receipt that an item has been received damaged (please see risk below).
Returning an item – Risk
On receipt of the delivery you, the customer, are responsible for those goods and any loss or damage to the goods shall be at your own risk.
Returning an item – Incorrect
If you receive incorrect goods it is your responsibility to notify us within 72 hours of receipt at which point we will make the necessary arrangements.
Delivery shortages
Firstly, our carrier delivers parcels/packages. Any shortages of them must be reported to the driver on receipt. Secondly, shortages of contents of the parcel(s)/package(s) against the enclosed Brissco advice note must be made within 72 hours.
soil waste brochure
What is a waste pipe?
Waste pipes carry waste water from sinks, showers and other appliances that use water away from your home. They are usually narrower than soil pipes since they are only designed to carry water. These pipes do not require a venting system since they do not carry contaminated water that can produce harmful gases. Push-fit waste pipes are becoming more and more popular with both DIYers and professional installers. This is because they: Are easy to install and create a water-tight fitting thanks to ring-seal joints.
Installing a waste pipe?
It’s important to know the difference between waste and soil pipes as each require different vents and connections upon installation. When installing a waste pipe, it is crucial to use fewer connections and keep the piping as simple as possible to ensure the drainage process is smooth and water can be carried away easily.
is this pipe suitable for cutting down in length?
Yes, the waste pipe can be cut down to the lengths required.
